Off-Grid Solar Power Kit for Starlink & Wireless Networks

 

✅What Is Guardian Relay

Guardian Relay is a DC-based off-grid solar power kit optimized for low-to-medium communication loads. It is purpose-built for infrastructure equipment that must remain online 24/7, even in remote or harsh environments.

By eliminating unnecessary AC conversion, Guardian Relay reduces system complexity, improves efficiency, and significantly increases long-term reliability.

Typical deployments include:

• Remote Starlink communication sites
• Wireless relay and repeater stations
• Temporary or mobile network deployments
• Off-grid IoT and monitoring gateways

 

Why Guardian Relay Is a Critical Solar Power System

Unlike standard solar kits designed for residential or intermittent use, Guardian Relay follows critical power design principles:

• Continuous-duty operation
• Stable and regulated DC power output
• Reduced failure points (no inverter)
• Long service life with lithium energy storage

This makes Guardian Relay suitable for communication infrastructure where downtime is unacceptable.

 

Why DC Solar Power for Starlink & Wireless Networks

Starlink terminals and network equipment are inherently DC-powered devices. Guardian Relay adopts a pure DC architecture to match this requirement directly.

Key advantages of DC solar power:

• No inverter required
• Higher overall system efficiency
• Lower standby and conversion losses
• Improved reliability over long-term operation
• Faster installation and simplified maintenance

For off-grid communication systems, DC solar power is both technically and economically superior.

 

🌞 Typical Applications

Guardian Relay is commonly used in the following scenarios:

• Starlink terminals (standard and mini)
• Wireless relay stations and repeaters
• PoE-powered network devices
• Remote communication nodes
• Emergency or temporary communication systems

It is ideal for sites requiring stable power with moderate runtime autonomy.

 

⭐System Configuration (Typical)

The configuration below represents a standard Guardian Relay system. Final specifications may be adjusted based on project location, solar conditions, and runtime requirements.

Solar power system for WIFI Relay

Solar Panels

• Monocrystalline solar panels
• Total rated power: 430W (configurable)
• Suitable for pole, ground, or rooftop installation

 

Battery Storage

• Battery type: LiFePO₄ (Lithium Iron Phosphate)
• Nominal voltage: 25.6V
• Capacity: 100Ah (2.56kWh)
• Integrated BMS with over-charge, over-discharge, and temperature protection

 

Solar Charge Controller

• MPPT solar charge controller
• 24V system architecture
• Optimized for variable solar conditions

 

DC-DC & PoE Power Unit

• DC input range: 18–36V
• Output voltage: 48–54V DC
• PoE standards: IEEE 802.3af / at / bt
• Maximum PoE output power: up to 90W

 

Enclosure & Protection

• Outdoor metal enclosure
• Protection level: IP65
• Pole mount or wall mount installation
• System configuration can be customized to meet specific environmental and operational requirements.

 

Design Assumptions

Guardian Relay is designed based on the following typical operating conditions:

• Average load: ~60W continuous
• Target autonomy: ~12 hours
• Outdoor, unattended installation
• Priority on system stability rather than peak power

These assumptions ensure predictable and reliable performance for communication infrastructure.

 

Application Limitations

Guardian Relay is not designed for:

• Household AC appliances
• High inrush or motor-driven loads
• Residential mixed-load power systems

For higher loads or extended autonomy requirements, please refer to Guardian Core or Guardian Pro systems.

 

Expansion & Customization Options

Guardian Relay can be adapted to different project needs:

• Battery capacity expansion for longer runtime
• Increased solar panel capacity for low-irradiation regions
• Alternative DC or PoE output configurations
• Integration with monitoring or remote communication modules

JOYVOIT’s engineering team can tailor the system for specific applications.

 

Reliability & Quality Focus

• Industrial-grade components selected for long service life
• Designed for continuous operation in outdoor environments
• Factory-tested before delivery
• Proven performance in remote and harsh conditions

Guardian Relay is built to support critical communication systems with confidence.

 

Part of the Guardian Critical Solar Power Series

Guardian Relay belongs to the JOYVOIT Guardian Series, covering a wide range of critical solar power solutions

• Guardian Mini – ultra-low power systems
• Guardian Relay – communication and network nodes
• Guardian Core / Core+ – surveillance and 24/7 systems
• Guardian Pro – marine and industrial applications

 

Frequently Asked Questions

Can Guardian Relay power Starlink continuously?
Yes. When properly sized for location and load, Guardian Relay is designed for stable, continuous Starlink operation.

Can battery or solar capacity be expanded?
Yes. Both battery storage and solar input can be customized.

Is this system suitable for harsh environments?
Yes. The system uses outdoor-rated components and an IP65 enclosure for reliable operation.

Guardian Relay is a professional critical solar power solution by JOYVOIT, purpose-built for off-grid communication systems where reliability truly matters.